01100001 01101110 01100001 01101110

#device ADC=10
1. fuses HSPLL, NOWDT,NOPROTECT, NOLVP,NODEBUG, USBDIV,PLL2,CPUDIV1,VREGEN, NOBROWNOUT // 8MHZ
2. use delay(clock=48000000)

3. define USB_HID_DEVICE TRUE
4. define USB_EP1_TX_ENABLE USB_ENABLE_INTERRUPT //Uçnokta1'de Kesme transferi aktif
5. define USB_EP1_RX_ENABLE USB_ENABLE_INTERRUPT
6. define USB_EP1_TX_SIZE 64 //Uçnokta1 için maksimum alınacak ve gonderilecek
7. define USB_EP1_RX_SIZE 64

8. include <pic18_usb.h>
9. include <USB_Driver.h> //USB konfigurasyon bilgileri bu dosyadadır.
10. include <usb.c>
11. include <lcd_driver.c>
12. include <One_Wire.c>
13. include <DS1820.c>

14. use fast_io(a)
15. use fast_io(b)
16. use fast_io(c)
17. use fast_io(d)

18. define UcNokta1 1

unsigned int16 Term;
unsigned int8 paket[64];
unsigned int8 Tam, Onda;
float Sicaklik;

void main()
{
setup_timer_3(T3_DISABLED | T3_DIV_BY_1);

set_tris_a(0x00);
set_tris_b(0x00);
set_tris_c(0x00);
set_tris_d(0x00);
output_a(0x00);
output_b(0x00);
output_c(0x00);
output_d(0x00);

lcd_init();
output_high(pin_b7);
delay_ms(100);
output_low(pin_b7);
printf(lcd_putc,"f");
printf(lcd_putc,"USB Baglantisi");
lcd_gotoxy(1,2);
printf(lcd_putc,"Bekleniyor");
delay_ms(100);

usb_init();
usb_task();
usb_wait_for_enumeration(); //Cihaz, hazır olana kadar bekle

if(usb_enumerated())
printf(lcd_putc,"f");
printf(lcd_putc,"Baglanti Kuruldu");
lcd_gotoxy(1,2);
printf(lcd_putc,"DS18B20 Okunuyor");
Sicaklik = ds1820_read(); //Sıcaklığı Oku...
printf(lcd_putc,"f"); // Ekranı sil...
lcd_gotoxy(5,1);
printf(lcd_putc,"Mucit23");
while(TRUE)
{
while(usb_enumerated())
{
if (usb_kbhit(1)) //Eğer pc'den yeni bir paket geldiyse
{
usb_get_packet(UcNokta1, paket, 64); //paketi oku
output_high(pin_a0);
}
lcd_gotoxy(1,2);
printf(lcd_putc,"SICAKLIK=%3.1f", Sicaklik);
lcd_putc(223);
lcd_putc("C ");
Term=Sicaklik*10;
Tam=Term/10;
Onda=Term%10;
paket[1]=Tam;
paket[2]=Onda;

usb_put_packet(UcNokta1, paket,64, USB_DTS_TOGGLE); // Datayı Gönder..
Sicaklik = ds1820_read();
}
}
}